Vinyl and Tarp Repair Patches
- Bonds in seconds - Clear adhesive patches
- Use for tarps, camping gear, awnings, inflatables, pool liners and more
- Airtight, Waterproof and Flexible
- 40 sq inches of Tear Mender
- Acrylic adhesive technology delivers bonds that are NOT weakened by water
- Sizes/Qty included per kit: 2x 120mm x 90mm & 1x 80mm x 45mm
Description
- Airtight, Waterproof, Flexible and Durable
- Suited to Durable, Long Lasting Repairs to Vinyl, Tarps, Seating and Smooth Fabrics
- Just Peel and Stick
- 3 Patches per box
- Bish's Original Product
Bish's Original Vinyl Mender Plus creates strong ad durable bonds
“Trust the Bish” brand Clear Adhesive Patch is ideal for fast repairs to Pool Liners, Towable Tubes, Inflatables and Poly-Tarps. It instantly seals leaking seams, tears and pinholes, stops rips from spreading and acts as an abrasion-resistant shield on high-wear areas.
Download the Vinyl Mender brochure here
REPAIRS TEARS AND HOLES IN: TARPS • SEATING • AUTOS • BOATS INFLATABLES • AIR MATTRESSES JETSKIS • ATVs • SNOWMOBILES GOLF CART • POOL LINERS POOL TOYS • TENTS • SAILS MOTORCYCLE SEATS • BOAT COVERS • BOAT TOWABLES CUSHIONS • FISHING WADERS AWNINGS • SLEEPING BAGS CAMPING PADS • INNER TUBES UPHOLSTERY HIGH-STRENGTH BONDS ON: FIBERGLASS • VINYL SURFACES NYLON • ACRYLIC FABRIC LEATHER • NEOPRENE METAL SURFACES • MAN-MADE FABRICS • POLYPROPYLENES POLYETHYLENES POLYURETHANES FINISHED WOOD SURFACES FABRICS – SYNTHETIC & NATURAL PLASTIC SURFACES
Directions for Vinyl Mender Clear Adhesive Patch - General Use Directions
Clean Surface to be Repaired with Alcohol swabs (provided) and let dry.
Cut clear adhesive patch to desired size. The patch should be approximately 25mm larger in all directions of the cut / torn / damaged area. Peel the patch from the backing paper and smoothly apply to damaged area taking care to avoid trapping air bubbles. Press down firmly along all the edges of repair. Repaired items should not be machined, washed or dried.
Note: Clear adhesive patch may be applied under water.
Step by Step Hints and Suggestions
1) Clean the surface to be repaired and let the area completely dry. Alcohol swabs are provided but you can also use a mixture of Isopropyl alcohol and water (50/50) as the cleaning solution.
2) Cut the Clear Adhesive patch to a size 25mm larger than the damaged area in all directions. Round the corners of the patch to reduce the possibility of peel back. Rounded corners patches perform better than with square corners.
3) Prepare the patch for application by peeling back a small portion of the liner. By peeling back approximately 10mm allows for starting the bonding of the Clear Adhesive Patch at one end and then slowly moving along smoothing the patch and pushing out any air bubbles.
4) Press down firmly over the entire patch and rubbing hard along all the edges of the Adhesive Patch Note the Acrylic Adhesive Technology delivers Hi-Tack initial bond that is fully cured after 6 hours for a durable and long lasting repair.