303 Fabric Guard for Marine (473ml)
- Restores lost water and stain repellency to factory new levels
- Provides strong resistance against soiling
- Protects against water-based and oil-based stains
- Does not alter fabric color, feel, flammability or breathability
- Safe for the synthetic or natural fibers
- The only product recommended by and for Sunbrella®
Description
303® Fabric Guard is the only product recommended by and for Sunbrella®, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303® Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
Example Use Cases:
BOAT CUSHION
- Untreated: Cushions are stained and water soaks into the fabric.
- Treated with 303® Fabric Guard: Water and soil repel from the fabric, prolonging its life.
UMBRELLA
- Untreated: The umbrella is stained from outdoor elements and rain.
- Treated with 303® Fabric Guard: Water and soil repel from the fabric and it is protected from outdoor elements.
- Click here to download 303 Marine Range Brochure PDF
- Click here to download 303 Fabric Guard Safety Data Sheet
A note about postage of this product: 303 High Tech Fabric Guard is a flammable product and, as such, can only be sent to customers with Australia Post by road transport to comply with Dangerous Goods Exemption freight.
WHAT IS 303 ® FABRIC GUARD™?
303® Fabric Guard is the only product recommended by and for Sunbrella®, as well as other fabric manufacturers to restore lost water and stain repellency. It offers unbeatable protection against soiling, water-based AND oil-based stains, and is safe enough to use on the most delicate of fabrics.
WHAT SURFACES CAN 303 ® FABRIC GUARD BE USED ON?
303® Fabric Guard can be used on all types of fabrics, including natural fibers & synthetics. Great for use on your outdoor pillows and cushions, fabric awnings or canopies, umbrellas, Bimini boat tops, as well as fabric convertible tops and more!
HOW DO I USE 303® FABRIC GUARD?
Use only on newly, cleaned, dry fabrics. For best results, treat fabrics in warm weather, of at least 70 degrees or warmer. In a well-ventilated area, apply 303® Fabric Guard on fabric until damp, overlapping in a crisscross pattern. Do not saturate. Let dry for 6-12 hours in a clean, dry environment before using or storing.
HOW DO I USE 303® FABRIC GUARD?
Use only on newly, cleaned, dry fabrics. For best results, treat fabrics in warm weather, of at least 70 degrees or warmer. In a well-ventilated area, apply 303® Fabric Guard on fabric until damp, overlapping in a crisscross pattern. Do not saturate. Let dry for 6-12 hours in a clean, dry environment before using or storing.
Usage Directions:
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
COVERAGE: 40-75 sq. ft (3.7–7 sq. m) per 16fl.oz (473ml) depending on material and application method.