3 Bow Bimini - Whitewater - Aluminium
The 3 Bow Aluminium Bimini Cover is available in 3 Mounting Widths each with a different Canopy Width, please refer to the sizing information to choose the correct size
The Length of the Bimini Roof Line is 1.3m / 130cm
The height of the Bimini Top is between 0.9m and 1.2m
- 3 Bow Whitewater Bimini with 25mm Anodized Aluminium double wall aluminum snap lock frame
- Available in 5 Mounting Widths from 1.3m up to 2.3m
- 25mm hard anodised aluminium tubing
- Available in Blue, Grey, Black, Maroon or Sand Canvas Tops
- High Tech Polyester ATLAS Canvas 310 g/m2
- Supplied with Aluminium framework, Fabric, Heavy duty webbing straps, Crossbars and components.
- The Max Speed Rating is 45 knots
- Includes Built in Bimini Storage Boot
- Warranty - 1 Year Warranty
How to choose a Bimini Cover / Top for your Boat
How to choose the correct size Bimini Cover / Top for your Boat
Firstly decide which area of the boat you would like to have covered when you are out on the water, the covers range in size from 5’ to 10’ in length depending on the type of cover. So you will need to measure your boat to be able to choose the correct size.
To decide where you are going to mount the top to the frame measure the distance between the mounting point on your boat from port to starboard this will be the size of the cover that you require.
If you own a sports boat the mounting points for the Bimini Top are not always clear to identify so spend some time working out the best mounting position on your boat.
The following details are relevant to the Bimini covers in our range.
The materials do have UV protection so that the color doesn’t fade when exposed to the sun for long periods of time and they have a finish which is designed to prevent molding.
The frames are available in Stainless Steel and Aluminium depending on the bimini type, Generally if possible you are better off choosing a Bimini top with a stainless steel or aluminum frame.
The hardware varies between Stainless Steel and Nylon, please refer to information about the specific bimini cover, Stainless steel is the most aesthetically pleasing but nylon provides better performance.
Check the wind rating in the description and that it is suitable for the speed you travel in your boat.
Bimini Cover / Top Fabric Information
| Fabric / Material Weight | 310 g/m2 |
| Material Type | 100% High Tech Polyester |
| Fabric Water Column | ≥ 150 mbar (1500 mm) |
| Fabric Tensile Strength | ≈ 2200 N¹ | 1400 N² |
| Elongation | ≈ 40 %¹ | 30 %² |
| Fabric Coating | Polyurethane [PU] |
| UV Protection Factor | UPF 50+ (measured value > UPF 80) |
This product is backed by a One (1) Year Warranty. To read our full Warranty details, please click here.